Water
There are 10 products that meet your choice
Pulse Splitter
Product reference: CA-Pulse-SP
The CADIS pulse splitter is used to split the pulse of a consumption meter so that this pulse can be measured by two different readout systems or data loggers. This pulse splitter does not require a separate voltage. It receives that from the measurement system to which it is connected. This splitter works with pulses coming from a reed contact or it can also be a pulse with an open collector output. In an open collector output, the polarity must be respected. The measured pulse must have a minimum duration of 5 ms.
Single Jet Water meter
Product reference: SJC-DN
Compact water meters for cold water meter with dry counter. MID approved, accuracy ratio R160, suitable for invoicing, tamper-proof. Meters can be with a pulse output or with the MBus protocol using a cable or radio module.
Multi Jet water meter
Product reference: MJC-DNxx
Multi Jet water meter cold water applications suitable for billing applications. For measuring potable water or lightly polluted water. A meter with dry vacuum -sealed counter, , MID approved, accuracy ratio R100 and fraud free. Can be fitted horizontally and vertically, also available in a version for risers. With a pulse output or with the MBus protocol using a cable or radio module.
Woltman hot water flow meter
Product reference: WC-WH-DN
Woltman water meters are used for measuring large flow of potable water. There is a version for cold and one for hot water. Housing with epoxy coating; Low pressure loss and the communication is with pulse output or with the Mbus protocol.
Woltman water flow meter
Product reference: WC-WH-DN
Woltmann water meters are used for measuring large flow of potable water. There is a version for cold and one for hot water. Housing with epoxy coating; Low pressure loss and the communication is with pulse output or with the Mbus protocol.
Multi Jet hot water meter
Product reference: MJH-DN
Multi Jet water meter hot water applications suitable for billing applications. For measuring potable water or lightly polluted water. A meter with dry vacuum -sealed counter, MID approved, accuracy ratio R50 and fraud free. Can be fitted horizontally and vertically, also available in a version for risers. With a pulse output or with the MBus protocol using a cable or radio module.
Single Jet hot watermeter
Product reference: SJH-DNxx
Compact hot water meter suitable for invoicing. A single jet water meter with dry counter, MID approved, accuracy ratio R160 and tamper-proof. With a pulse output or with the MBus protocol using a cable or radio module.
Electromagnetic flow meter
Product reference: CA-ESHCM-EM
Electromagnetic flow meter for a combined thermal energy system. This meter contains no mechanical parts. The flow meter is connected to a calculation module. This measuring principle allows to monitor larger heating/cooling applications. With the electromagnetic flowmeter of MeterGo you have a convenient solution for measuring your heating and cooling.
Clamp-on Ultrasonic Flow Meters
Product reference: CA-ESHCM-CLAMP
The ultrasonic flow measurement of a clamp-on flow meter is contactless. This works by means of transducers that are placed on the pipes . The clamp-on flow meter then transmits and simultaneously receives ultrasonic signals through the transducers. By measuring the difference, the clamp-on flow meter can determine the flow rate. This meter is suitable for non-contact flow measurement and for energy measurement.
Ultrasone Watermeters
Product reference: CA-US-QF1-DNXX
The Ultrasonic Watermeter is a static water meter based on the ultrasonic technology. This technology enables accurate calculation of water consumption and eliminates measuring deviations caused by sand, suspended particles or air pockets.