This module converts the pulse signal of a consumption meter into the Mbus protocol. Up to two consumption meters can be connected simultaneously. The power supply for this module is provided by the Mbus loop. This module is equipped with a backup battery in case of a problem on the Mbus loop. So there is never a loss of data.

The CADIS pulse splitter is used to split the pulse of a consumption meter so that this pulse can be measured by two different readout systems or data loggers. This pulse splitter does not require a separate voltage. It receives that from the measurement system to which it is connected. This splitter works with pulses coming from a reed contact or it can also be a pulse with an open collector output. In an open collector output, the polarity must be respected. The measured pulse must have a minimum duration of 5 ms.

The CCR is a very compact module with touchscreen and webserver to measure all energy consumption.  All consumption data is recorded at regular intervals using either a wireless or hardwired connection, and stored in the module’s memory. This data can be consulted locally via the touchscreen, or remotely via a network. It is also possible to transmit data automatically to an FTP server, which allows data from a number of buildings to be monitored centrally.  What really sets this CCR module apart is that users can simply and rapidly create consumption reports.

Compact water meters for cold water meter with dry counter. MID approved, accuracy ratio R160, suitable for invoicing, tamper-proof. Meters can be with a pulse output or with the MBus protocol using a cable or radio module.

Multi Jet water meter cold water applications suitable for billing applications. For measuring potable water or lightly polluted water. A meter with dry vacuum -sealed counter, , MID approved, accuracy ratio R100 and fraud free. Can be fitted horizontally and vertically, also available in a version for risers. With a pulse output or with the MBus protocol using a cable or radio module.

Woltman water meters are used for measuring large flow of potable water. There is a version for cold and one for hot water. Housing with epoxy coating; Low pressure loss and the communication is with pulse output or with the Mbus protocol.

Woltmann water meters are used for measuring large flow of potable water. There is a version for cold and one for hot water. Housing with epoxy coating; Low pressure loss and the communication is with pulse output or with the Mbus protocol.

Multi Jet water meter hot water applications suitable for billing applications. For measuring potable water or lightly polluted water. A meter with dry vacuum -sealed counter, MID approved, accuracy ratio R50 and fraud free. Can be fitted horizontally and vertically, also available in a version for risers. With a pulse output or with the MBus protocol using a cable or radio module.

Compact hot water meter suitable for invoicing. A single jet water meter with dry counter, MID approved, accuracy ratio R160 and tamper-proof. With a pulse output or with the MBus protocol using a cable or radio module.

Registering and monitoring the consumption of a small amount of meters has never been easier! The compact SMART MONITORING MODULE (SMM) automatically and permanently records consumption and, via internal software, automatically creates clear reports that are e-mailed to the user. All meter types equipped with a wired or wireless M-bus communication (meterbus) are eligible. If the meters are equipped with a pulse, Metergo can supply a module that converts this pulse to the Meterbus protocol. The SMM module can be connected directly to the building's computer network to transmit the data or reports. If no network is available, you can provide this module with a SIM card and send the reports via the telecom network. For larger projects (more than 60 consumption meters) we refer to the CONSUMPTION REPORTER (CCR).

The heat cost allocator is placed for the correct statement of the consumed heat energy in apartments or studio’s. This solution is adapted in the places where thermal energy meters can't be installed in the pipes. The heat cost allocator  correctly measures the heat. External heat sources such as the sun or outdoor heat does not effect the measurement results. The CA-EERM does not measure the temperature in the room, only the heat from the radiator. This module automatically generates the correct consumption reports.

Rotor meters are used to measure larger volumes of gas for pipelines from DN40 to DN150. They comply with all recent standards and regulations, both international and European. They also comply with ISO 9001:2000 ISO14001. They have the great advantage of being very compact. The number of revolutions of the rotors in these meters is proportional to the amount of gas displaced under the prevailing pressure and temperature. Double reed contact and an anti-fraud reed contact are available as standard for a central reading of the gas consumption. Cadis supplies a central registration module CCR for this purpose. Translated with www.DeepL.com/Translator (free version)

The gas meters can be used to measure: natural gas - city gas - propane or butane gas. Depending on the type, they have a single or double pipe connection. The gas meters are standard equipped with an impulse magnet. An impulse transmitter can optionally be purchased (1imp=0,01m³) so that they can be read centrally. Cadis supplies a central registration module CCR for this purpose. These gas meters are suitable for measuring gas volumes up to 25 m³/h. For higher flow rates we refer to the rotor gas meters.  

Digital single- to triple-phase electricity meter for sub metering with Mbus or LORA  communication.

Calculation module for a thermal energy meter. This calculation module must be combined with a separate flow meter and separate temperature sensors. These systems can be used for heating, cooling and for combined heating/cooling applications. With MID approval and wireless Mbus communication.

Compact ultrasonic calorimeter for heating.  Standard delivered with raccords 1/2 "MM.For mounting in return line.Wireless Mbus communication.Supplied with connection piece M10x1 - 1/2 "M for temperature sensor.